DKS 9100 Manuel du propriétaire télécharger pdf (Page 9)

• For gate operators utilizing contact sensors:

1. One or more contact sensors shall be located where the risk of entrapment or

obstruction exist, such as at the leading edge, trailing edge, and post mounted both

inside and outside of a vehicular horizontal slide gate.

2. One or more contact sensors shall be located at the bottom edge of a vehicular

vertical lift gate.

3. One or more contact sensors shall be located at the pinch point of a vehicular vertical

pivot gate.

4. A hardwired contact sensor shall be located and its wiring arranged so that the

communication between the sensor and the gate operator is not subjected to

mechanical damage.

5. A wireless contact sensor such as one that transmits radio frequency (RF) signals to

the gate operator for entrapment protection functions shall be located where the

transmission of the signals are not obstructed or impeded by building structures,

natural landscaping or similar obstructions. A wireless contact sensor shall function

under the intended end-use conditions.

7. One or more contact sensors shall be located at the bottom edge of a vertical barrier

(arm).

9100-065-D-5-07 Page 9

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 52 53

Pas de commentaire

DKS 9100 Manuel du propriétaire Page 9