DKS 6500 Manuel du propriétaire télécharger pdf (Page 24)

6500-065-W-3-14

AC Power

Reverse

Shadow

Reverse

Primary

Operator

Secondary

Operator

Primary/secondary interconnection cable

in underground conduit.

TO OP

hni

an us

e on

3.5 Secondary Current Sensor Adjustment (Dual Gates ONLY)

The PRIMARY gate operator’s “secondary reversing sensor” uses a secondary current sensing device (Located only in the

primary operator) to detect any obstructions “physically” encountered in the SECONDARY gate path when using dual gates.

The secondary current sensor uses a sensing coil with a given number of turns through it to monitor the current flow into the

secondary operator. Each time the wire passes through the coil, it is considered a turn. The number of turns through the

sensing coil is dependant on the operating voltage of the operator and the weight of the gate. In general, light weight gates may

require additional turns of wire through the secondary current sensor, while heavier gates may require less turns. CAUTION –

HIGH VOLTAGE: Be sure power is turned OFF before changing the number of wire turns to the secondary current sensor. When

you are setting the secondary reverse sensor (section 3.4 on the previous page) and reach the MAXIMUM sensitivity position

on the reverse sensor without activating the secondary operator reversing function, add an additional turn of wire through the

secondary current sensor. If you set the secondary reverse sensor to the MINIMUM sensitivity position and the gate will not

cycle completely, reduce the number of turns through the secondary current sensor.

Secondary Operator Model Turns

115 - 1/2 HP - Single Phase

115 - 1 HP - Single Phase

1 Turn

Sample Turns

2 Turns

Secondary

Current

Sensor

located

only in

primary

operator.

Typical Number of Turns for

Secondary Current Sensor

Primary Operator

To AC power terminal.

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 47 48

Commentaires sur ces manuels

Pas de commentaire

DKS 6500 Manuel du propriétaire Page 24

Commentaires sur ces manuels